The air-con filter is among the most important air-con parts in the air-con system. Without it, your air-con system will be dirty and the air you breathe would be filled with pollutants. All air-con parts, from the ductwork to the air-con refrigerant, need the air conditioning filter to be clean and replaced to make sure you’re getting the very best in central air conditioning.

If an air conditioning filter is left dirty, as time passes, it can lead to higher energy costs and short
equipment life due to all the air conditioning parts counting on each other. You can not work minus the other. Overall, your cooling and heating will not be as effective and you may need to invest in more air-con repair and air-con maintenance.

ac repair ought to be changed on a monthly basis or every 8 weeks for home air-con systems and every couple of weeks for several commercial or industrial air-con since it’s running almost 24 hours a day, 7 days a week. Achieving this as a routine in your monthly chores rather than waiting and soon you see dust matted on the air conditioning filter will ensure you as well as your family the most effective health in addition to a smooth running air-con system . Dust particles cannot always be seen so although you may see a little dust on the air conditioning filter , clean it as you normally would.

Since there are a range of air-con filters , how quickly one gets blocked versus another depends upon the brand – most air-con filters are sized 1 � to 2 square feet for each ton of capacity for a home or commercial property.

You can judge a filter’s ability to clean through the use of MERV ratings – Minimum Efficiency Reporting Value – which is a rating of how efficient an air-con filter is from 1-12. The bigger the rating, the far better it is at removing particles such as animal dander, pollen, dust, mold and other allergens, and the higher the protection for your air conditioning equipment . Most air conditioning filters screen out particles measuring from 3 to 10 microns in proportions.

The common types of air-con filters are:

Conventional fiberglass disposable filters (1″ and 2″): These are common generally in most homes and small industrial ac units and commercial air-con systems. Since they are disposable and also have an adhesive coating that traps the dust, you ought not clean the filters . This may damage the filter’s ability to remove particles by damaging the adhesive coating and/or the underlying mesh work. They are both much less effective as other types of filters even though they are lower in cost.

Pleated fiberglass disposable filters (1″ and 2″): The 1″ are usually found in many residential and commercial settings and so are made of materials that may vary in the effectiveness. Usually, they’re more densely woven to improve the efficiency of removing dirt. These have a larger surface area to result in increased trapping of particles compared to conventional filters. They must be specified for your air-con system or this can lead to increased demand on your air conditioning components.

Thereby, a mismatch could be counterproductive on the fitness of the air conditioning system and perhaps lead to higher air-con maintenance and service cost. You need to check with the air conditioning manufacturer regarding the appropriate type of pleated filter for your system. A filter spray can be applied following the cleaning and drying of the air-con air filter .

Electrostatic filters: Different in design and performance, since you can find so many varieties, it is extremely difficult to determine which is the most efficient. They’re commonly advertised as allergy-free air-con filters. These filters are also available in the 1″ and 2″ sizes. Air that moves through the filter creates a static charge that collects any dust in the filter. They may require more cleaning and much more blower power.

Electronic filters : Connected to a power power source and usually wall mounted, electronic filters come with a pre-filter that can collect larger particles and only should be cleaned every six months.

Carbon filters : These filters contain carbon that may control any odor problems you might have within the air-con system . They can also be useful in homes with pets.
Air Conditioning Filter Installation

When placing the appropriate air conditioning filter into the system, the filter ought to be placed in the correct direction as indicated by the arrow on the side or face of the filter. Air should flow in the correct direction which is in the same direction as the arrows. This enables the filter to work appropriately, because the air exits the filter in the most reinforced section of the filter.

The air-con filter should fit tightly. An ideal seal is necessary to avoid unfiltered air from entering and damaging your air-con system. Without a perfect seal and appropriate sizing, the filter is useless. Additionally, the non-conventional filters could have a higher efficiency and may not fit your system. This should be checked with an air conditioning company, contractor, or air-con supply company.